Test and Measurement Forum

Amplifier for Picscope's signal generator

Post any questions you may have about our current range of oscilloscopes

Amplifier for Picscope's signal generator

Postby heisenberg2 » Mon Jul 27, 2015 1:02 pm

Hey all.

I wonder if there is any amplifier for the signal generator of our Pico-Scopes exisiting? The limited voltage range is causing quite a lot of trouble and it should be easy to design an amplifier, to transfer the signal to an external VDD, e.g. 5V or 12V.

However, it still needs some thoughts. E.g. switching frequency, linearity and the right connectors. So before I design one on my own, I would rather like to buy a box ready to use.

Is there anything existing?

Best regards, Heisenberg
Posts: 0
Joined: Mon Jul 27, 2015 12:57 pm

Re: Amplifier for Picscope's signal generator

Postby SOPTEA » Fri Dec 09, 2016 8:45 pm

Found something ?As I am as cheap is possible I will build a small LM358 based amplifier because need around 12 volts of amplitude .
L.E.:Built and working AC noninverting LM358 amplifier using info from datasheet
Posts: 0
Joined: Fri Sep 09, 2016 12:32 pm

Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 1 guest