Signal generator, arbitrary functionlity - 1 hz issue

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
Nigristriata
Newbie
Posts: 0
Joined: Sun Jul 12, 2015 5:18 pm

Signal generator, arbitrary functionlity - 1 hz issue

Post by Nigristriata » Sun Jul 12, 2015 5:26 pm

I tried to create a short pulse by using the signal generator of the picoscope 5444B.
For this the arbitrary functionality has to be chosen.
But when this one is selected, a frequency of 1 hz or less is not working.

Hitesh
Site Admin
Site Admin
Posts: 2829
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Signal generator, arbitrary functionlity - 1 hz issue

Post by Hitesh » Mon Jul 20, 2015 8:54 am

Hi Nigristriata,

What settings are you using?

Are you able to provide the csv file for your Arbitrary Waveform as well as the settings for the AWG in PicoScope 6?

Regards,
Hitesh

Technical Support Engineer

Post Reply