Test and Measurement Forum

pico adc 200/20

Discussion forum for the new Picoscope Linux software

pico adc 200/20

Postby easy455 » Sun Jul 12, 2015 9:40 am

Hi all would I be able to use an adc200/20 to check a cdi diesel injector to see if the pilot injection is working if so what would I need? Thank you in advance.
easy455
Newbie
 
Posts: 0
Joined: Sun Jul 12, 2015 9:29 am

Re: pico adc 200/20

Postby Hitesh » Mon Jul 20, 2015 8:50 am

Hi easy455,

Are you looking to use the PicoScope 6 for Linux software? If so, the ADC200/20 would not be supported by this software and we currently do not have an Automotive version.

You may wish to ask this question on our Automotive Support Forum where a member of our community should be able to assist.

Regards,
Hitesh

Technical Specialist
Pico Technology
Hitesh
Site Admin
Site Admin
 
Posts: 2058
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: pico adc 200/20

Postby easy455 » Mon Jul 20, 2015 4:10 pm

Thank you Hitesh.
easy455
Newbie
 
Posts: 0
Joined: Sun Jul 12, 2015 9:29 am

Re: pico adc 200/20

Postby Hitesh » Wed Jul 22, 2015 9:05 am

Hi easy455,

Just a few other things to note:

  • The ADC200/20 is an 8-bit resolution device
  • Attenuators would need to be used
  • The device could only be used with the legacy PicoScope 5 software for waveform capture
Hitesh

Technical Specialist
Pico Technology
Hitesh
Site Admin
Site Admin
 
Posts: 2058
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire


Return to PicoScope for Linux

Who is online

Users browsing this forum: No registered users and 0 guests