Test and Measurement Forum

Moving from ADC-212 to PS-3423

Post general discussions on using our drivers to write your own software here

Moving from ADC-212 to PS-3423

Postby kenauer » Fri Aug 26, 2005 2:46 pm

We have been using the ADC-212 for a diagnostic product and are wanting to also support the PS3423. We directly connect to the driver software.

The settings we used to collect data on the ADC-212 do not map directly, but we've figured out how to map the differences... we think. However, the data we collect comes back with completely different results. The scale of the values seems hugely different. instead of ranging from 1 to 781 we are getting results ranging from -32767 to 10059.

Perhaps we're missing something in the documentation that tells us how to map these differently. Any pointers?

Postby Michael » Thu Sep 01, 2005 1:34 pm

Please view reply posting in the PicoScope forum.
Michael - Tech Support
Pico Technology
Web Support Forum
Zen Master
Zen Master
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Return to General Software Discussions

Who is online

Users browsing this forum: No registered users and 0 guests