hdmi cec one-wire-bus decode?

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
quintile
Newbie
Posts: 0
Joined: Mon Jul 06, 2015 11:33 am

hdmi cec one-wire-bus decode?

Post by quintile » Mon Jul 06, 2015 11:37 am

Hi,

Apologies if this is not the correct forum.

I have used a picoscope a little, and have been very impressed with the very slick i2c decode
capabilities - with real waveforms and events - much nicer that i2c debug products I have used
in the past....

but - is there an HDMI CEC decoder available from picotec? if not are there any third party
decoders available for this?

Many thanks for any help,

-Steve

Mark_O
Advanced
Posts: 0
Joined: Fri Oct 03, 2014 5:58 am

Re: hdmi cec one-wire-bus decode?

Post by Mark_O » Mon Jul 06, 2015 9:52 pm

quintile wrote:is there an HDMI CEC decoder available from picotec? if not are there any third party
decoders available for this?
Hi, Steve. There is no such decoder yet, but Pico has started adding new ones recently, at a pretty good rate. Their Beta version is now up to about 16! Which is quite impressive. So if folks make them aware of their specific needs, they may get implemented sooner.

As for 3rd-party decoders, there are none yet, since Pico has not provided any documentation on either of two methods whereby they can be created. Releasing these docs has been years in the making (literally), so I wouldn't advise holding my breath on that. Though I'd dearly love to see it myself.

- Mark

Hitesh
Site Admin
Site Admin
Posts: 2829
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: hdmi cec one-wire-bus decode?

Post by Hitesh » Tue Jul 07, 2015 1:12 pm

Hi Steve,

The feature request for HDMI CEC One Wire decoding has been submitted to our Development Team for consideration.

If you have any example waveforms, please send them to support@picotech.com so that they can be used for testing purposes.

Regards,
Hitesh

Technical Support Engineer

Post Reply