Test and Measurement Forum

Error using icdevice/connect

Post your MATLAB discussions here

Error using icdevice/connect

Postby zouluwei » Mon Jun 29, 2015 6:51 pm

The unit will not connect via Matlab, but will connect with the software from pico. I am using software PicoScope Oscilloscope Software 6.10.16 and 64 bit matlab R2014a. I copied all dll to MATLAB path. And I installed windows sdk 7.1.
When running "connect(ps6000DeviceObj);" i got this:
An error occurred while executing the driver connect code.
Library was not found
If this error is not an instrument error, use MIDEDIT to inspect the driver.
zouluwei
Newbie
 
Posts: 0
Joined: Mon Jun 29, 2015 6:28 pm

Re: Error using icdevice/connect

Postby Hitesh » Tue Jun 30, 2015 10:04 am

Hi zouluwei,

A change was made to the USB kernel drivers relating to USB 3.0 device with PicoScope 6.10.16 which means that the drivers in the SDK will not work with this new set of kernel drivers.

We are waiting for a new SDK to be uploaded which will resolve this problem.

In the meantime, please e-mail support@picotech.com and we will make an installer available for you.

Regards,
Hitesh

Technical Specialist
Pico Technology
Hitesh
Site Admin
Site Admin
 
Posts: 2063
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire


Return to MATLAB

Who is online

Users browsing this forum: No registered users and 0 guests