Test and Measurement Forum

Pico Wave Form Library

Having problems ? let us know the details here

Pico Wave Form Library

Postby Abndanger » Sun Jun 21, 2015 3:28 pm

Been trying to up load files to the wave form library. Issue is, I receive a message the file exceeds the 20mb limit. My file is actually a little over 15mb. If we are capturing files on a longer time base of 500 ms/div at a sample rate of 6MS at one frame will equal around 15mb.

Can we see about changing the criteria of the file size to be up loaded? If I were to go to 100 ms/div I stand a chance of missing something on my capture.
Abndanger
Newbie
 
Posts: 0
Joined: Sun Jun 21, 2015 11:03 am

Re: Pico Wave Form Library

Postby Martyn » Tue Jun 23, 2015 1:43 pm

We are aware of this and are considering the options. It is the creation of the reference waveforms that is causing the warning, even though your actual file size is below the limit.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2355
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Pico Wave Form Library

Postby Abndanger » Tue Jun 23, 2015 4:16 pm

Thanks for the reply Martyn.

I have over a 100 WPS or so and would like to upload them to the library. When will you know if this will be resolved?

I guess worse case scenario I could upload them to the AutoNerdz drop site :D
Abndanger
Newbie
 
Posts: 0
Joined: Sun Jun 21, 2015 11:03 am

Re: Pico Wave Form Library

Postby AuthorMike » Wed Jun 24, 2015 8:33 am

Hi Abndanger,

We definitely want those waveforms on our library :D

Sorry for my late reply to this, for future reference we have an automotive forum and our Automotive Techncial Support team are more active on there.

I'll keep an eye on this thread too,
Mike Valentine
(Automotive) Technical Author - Pico Technology
"I right complicate stuff in a easy too under stand weigh four those who need two no it"
User avatar
AuthorMike
Site Admin
Site Admin
 
Posts: 41
Joined: Mon Jan 31, 2011 11:22 am
Location: UK

Re: Pico Wave Form Library

Postby Abndanger » Thu Jun 25, 2015 1:59 am

Hey Mike,

Thanks for the reply.

I will reposted this discussion on the automotive forum in the morning.

Thanks for the reply :D
Abndanger
Newbie
 
Posts: 0
Joined: Sun Jun 21, 2015 11:03 am


Return to Getting Started

Who is online

Users browsing this forum: No registered users and 0 guests