Test and Measurement Forum

No contact to PS

Forum for discussing PicoScope version 6 (non-automotive version)

No contact to PS

Postby Gustav » Wed Jun 17, 2015 4:58 pm

Hi

My PS5244 has stopped working. PicoScope 6.10.16.2 can no longer find the scope.

When the scope is plugged in the red LED goes on like normal and the PC finds it, but PS6 does not.

I have tried to uninstall and re-install the USB driver. That did not change anything.

I am using the latest version of PicoScope, and I have not been updating recently. I use the scope constantly, so I hope for a quick response and a working solution.

I have literally no idea what is wrong. I came back to the PC after a little break, and it was impossible to get in contact with the scope via PS6.

Best regards,
Attachments
Nyt billede.jpg
ps1.png
Gustav
Guru
Guru
 
Posts: 63
Joined: Sat Jan 23, 2010 1:33 pm

Re: No contact to PS

Postby Gustav » Wed Jun 17, 2015 5:31 pm

Problem solved... for now. The scope has started to work again. It was apparently a PC restart that was needed.
Gustav
Guru
Guru
 
Posts: 63
Joined: Sat Jan 23, 2010 1:33 pm


Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 0 guests