Test and Measurement Forum

How to acquire the 5GS/s sampling rate on a ADC 212-100?

Post general discussions on using our drivers to write your own software here

How to acquire the 5GS/s sampling rate on a ADC 212-100?

Postby Giovani » Mon Jul 25, 2005 6:40 pm

Hi folks !

I´m currently developing an application for an ADC-212/100 and, since the signal to be acquired by it is a repetitive one, I want to be able to acquire it with the 5GS/s sampling rate for repetitive signals - as it´s said on the website - but since the manual doesn´t say anything at all about it, I´m asking for your help. How can it be done?

I´ll be anxiously waiting for your reply.
Posts: 5
Joined: Tue Jul 19, 2005 8:43 pm

Postby Michael » Tue Aug 16, 2005 11:27 am

Thank you for your post.

In order to get the high sampling rates, you will need to engage the Equivalent Time Sampling(ETS) modes.

You can do this by using the adc200_set_ets command. Further information can be found in the help files, search for ETS.

Please don't hesitate to contact us if you have any further questions.

Best regards,
Michael - Tech Support
Michael - Tech Support
Pico Technology
Web Support Forum
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Return to General Software Discussions

Who is online

Users browsing this forum: No registered users and 0 guests