PicoScope 3423

Which product is right for your exact requirements
Post Reply
Souriau

PicoScope 3423

Post by Souriau » Mon Jul 18, 2005 6:23 pm

Hi Can anyone tell me what is the minimum PC specs. needed for the Automotive 4 channels, PicoScope 3423?

User avatar
Autonerdz
Advanced User
Advanced User
Posts: 141
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA
Contact:

Rec PC

Post by Autonerdz » Tue Jul 19, 2005 2:21 pm

The 3423 is a USB 2.0 device. Therefore I suggest a more modern PC with USB 2.0. It needs to run Windows 98SE or higher. You don't need a huge memory, but, when it comes to PC memory, always get as much as you can afford for all round performance.

USB 1.1 works fine though, but the data transfer is a lot slower so the screens don't update as fast.
Tom Roberts
(The Picotologist)
http://www.autonerdz.com
skype: autonerdz
THE PicoScope Automotive Authority
In North America

Sarah

Post by Sarah » Wed Jul 20, 2005 8:16 am

Hi

Thank you for your post.

Just to add to what Tom has said, the computer should always meet the minimum requirements of the operating system - so having XP on a computer that was designed for 98 could be a problem.

Hope this helps

Best Regards

Post Reply