Test and Measurement Forum

Equipment Compatibility

Which product is right for your exact requirements

Equipment Compatibility

Postby deltaP » Mon Jun 01, 2015 1:09 pm

Hello,

I have the following differential pressure transmitter (https://www.honeywellprocess.com/librar ... -03-65.pdf - page 5 model STD-930). Would the ADC-20 data logger be compatible? I would want to monitor and log temperature also.

Thanks for your help.
deltaP
Newbie
 
Posts: 0
Joined: Fri May 29, 2015 7:31 pm

Re: Equipment Compatibility

Postby Martyn » Tue Jun 02, 2015 8:17 am

If you are looking at measuring temperature as well I would suggest the USB TC-08, https://www.picotech.com/data-logger/tc-08/thermocouple-data-logger with the single channel terminal board to measure the pressure (4-20mA)
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2280
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Equipment Compatibility

Postby deltaP » Tue Jun 02, 2015 1:54 pm

Thanks Martyn. I have a TC-08 that I could use. But I thought the ADC-20 would be able to do it all. Also, single channel terminal board? In previous apparatus, I've used an ADC-20 to measure T and P. So you are saying that the delta P unit I own is compatible?
deltaP
Newbie
 
Posts: 0
Joined: Fri May 29, 2015 7:31 pm

Re: Equipment Compatibility

Postby Martyn » Fri Jun 12, 2015 12:53 pm

The unit you linked to produces a 4-20mA signal so could be fed directly into the single channel terminal board, which plugs into one of the thermocouple slot on the TC08s. This is the simplest solution.

Using the ADC20 would require additional circuitry, which you would have to purchase and assemble.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2280
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Equipment Compatibility

Postby deltaP » Thu Jun 18, 2015 6:28 pm

Martyn,

Thanks for the response. I did not know that, and it is certainly a very cost effective alternative.

Chris
deltaP
Newbie
 
Posts: 0
Joined: Fri May 29, 2015 7:31 pm


Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 0 guests