Test and Measurement Forum

Pico ADC 16

Forum for discussing PicoLog

Pico ADC 16

Postby Barry Jackson » Thu Jul 14, 2005 11:31 pm

:?: Does the PICO ADC 16 use all the pins on the RS232 cable? can I get away with TX RX and Gnd?

I await your response.
Barry Jackson
 

Postby Sarah » Mon Jul 18, 2005 11:32 am

Hi

Thank you for your post.

The ADC-16 needs the following pins:

Pin 2 = Data from unit to the PC
Pin 3 = Data from PC to the unit
Pin 4 = -7V
Pin 5 = Gnd
Pin 7 = +7V

Hope this helps

Best Regards
Sarah
 


Return to PicoLog

Who is online

Users browsing this forum: No registered users and 0 guests