Test and Measurement Forum

save on trigger 9 (by pulse length)?

Forum for discussing PicoScope (version 5)

save on trigger 9 (by pulse length)?

Postby Guest » Fri Jul 08, 2005 12:57 pm

At present I'm using a 212-50 to help me debug some electronics. I've got a pulse, which sometimes is 10 times shorter than it should be. I'm try to look at what else is going on when this occurs. At present I'm triggering on this pulse and saving, coming back after an hour or so of measuring and having to look through each one of the plots to spot this shorter pulse (it occurs maybe once every 1000 or so). Is it/could it be possible to have a save on trigger if pulses are > or < a specified time frame?



Postby Sarah » Mon Jul 11, 2005 10:46 am


Thank you for your post.

Unfortunately there is no way of doing this in the software. The trigger modes in Picoscope do not allow you at present to set this function. The only way I can think to achieve what you require is to do as you are currently doing.

Best Regards

Return to PicoScope 5

Who is online

Users browsing this forum: No registered users and 0 guests