using Picolog with two USB TC-08

Forum for discussing PicoLog
Post Reply
AP

using Picolog with two USB TC-08

Post by AP » Thu Jun 30, 2005 3:56 pm

Hi,
I have been using Picolog successfully with a single USB TC-08 for 6 months now. I have just purchased a second USB TC-08 so that we can use upto 16 thermocouples.

I am having trouble getting 16 thermocouples to display in Picolog at the same time. I can configure 8 thermocouples on a single unit, but when I go to add the second unit, it overwrites the configuration of the first unit, therefore onlt ever allowing me to display 8 channels at a time. How do I display more 8 channels at a time?

I am running Picolog V5.12.1 which came on the latest CD.

Many thanks
Adrian

Sarah

Post by Sarah » Fri Jul 01, 2005 9:11 am

Hi

Thank you for your post.

You need to go to File | New Settings. When the first box appears you should see a little tick box in the bottom corner which is "Use Multiple Converters". If you tick this then you should be able to set up more than one.

Hope this helps

Best Regards

AP

Post by AP » Fri Jul 01, 2005 9:52 am

Hi,

It's all working now. I must have missed that tick box.

Thanks for your quick response

Adrian

Post Reply