Test and Measurement Forum

user programmable portable digital oscilloscope

Which product is right for your exact requirements

user programmable portable digital oscilloscope

Postby Flip » Thu Jun 30, 2005 1:14 pm

Dear Sir or Madam,

for the development of electric and electronic devices i'm currently searching for a user programmable portable digital oscilloscope with the properties as follow:

- measurement capabilities of a simple standard digital oscilloscope: min. 2 channels, acceptable voltage range min. -50V..+50V, min. 1MHz sampling rate per channel, min. 10 bit resolution, memory min. 1024 samples per channel, variable trigger
- built-in display, min. 320x200 monochrome
- user programmable signal analysis and displaying, abstraction level min. C++ or Basic (e.g. Simulink, LabView or Diadem)
- user programmable context sensitive control elements (e.g. softkeys, touchscreen)
- CPU min. 32Bit, min. 100MHz
- non-volatile program memory, min. 256MB data memory
- programming & data exchange over PC-compatible interface (e.g. USB, memory card, Ethernet, Bluetooth, ...)
- dimensions and weight smaller than stack of 1000 pages A4-paper
- Power supply by battery (accumulator) or mains

Additional desireable features or extensions:
- additional digital inputs
- CAN interface
- user programmable Logic for sample trigger generation (e.g. FPGA)
- shock-proof housing

Does pico technologies provide similar devices?

Kind regards
Flip
Flip
 

Postby Sarah » Fri Jul 01, 2005 9:01 am

Hi

Thank you for your post.

As our oscilloscopes are all PC based we do not unfortunately have a product to match your requirements.

Best Regards
Sarah
 


Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 0 guests