Linux software doesn't recognize ADC-200 on parallel port.

Post your Linux discussions here
Post Reply
wshatford
Newbie
Posts: 0
Joined: Wed May 13, 2015 5:45 pm

Linux software doesn't recognize ADC-200 on parallel port.

Post by wshatford » Wed May 13, 2015 5:59 pm

Linux software doesn't recognize ADC-200 on parallel port.

Hitesh
Site Admin
Site Admin
Posts: 2812
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Linux software doesn't recognize ADC-200 on parallel por

Post by Hitesh » Mon May 18, 2015 11:45 am

Hi wshatford,

Are you referring to the PicoScope 6 software or using the Software Development Kit? If it is the former, then the ADC-200 will not work with this software.

Regards,
Hitesh

Technical Support Engineer

wshatford
Newbie
Posts: 0
Joined: Wed May 13, 2015 5:45 pm

Re: Linux software doesn't recognize ADC-200 on parallel por

Post by wshatford » Mon May 18, 2015 6:38 pm

Hi - Thanks for the info. Yep, the PicoScope 6 software. I'll go back to my old Windows XP computer :-(

Post Reply