ADC-16 voltage offset

Post any questions about our serial port products
Post Reply
Guest

ADC-16 voltage offset

Post by Guest » Fri Jun 24, 2005 6:42 pm

Dear all,

I am using an ADC-16 to measure voltages from a laser and I have found that the values I get from the the logger are greater by about 20% compared to ones measured using a normal DVM.

Any ideas???

Thanks.

Sarah

Post by Sarah » Mon Jun 27, 2005 10:43 am

Hi

Thank you for your post.

If you try measuring a 1.5V battery with the unit, does this also shw the correct voltage? Try measuring some different things to see if the unit is giving faulty readings all the time.

Let me know how you get on

Best Regards

Post Reply