Test and Measurement Forum

application

Forum for discussing PicoScope (version 5)

application

Postby willie » Mon Jun 20, 2005 1:48 pm

kindly advise the following application

we intend to use Picoscope 3000 series

One of the main usages of the scope is to analyze digital pulses. Most of
the signal period
can go as low as micro seconds. i.e. 1 microsecond. Note that the signal is
not periodic.
I would like to capture a signal which may only have a length of
miliseconds, stop, and view
the signal.
andy
willie
 

Postby Sarah » Tue Jun 21, 2005 1:16 pm

Hi Andy

Thank you for your post.

This application sounds fine. The PS3000 is sufficiently fast that you should be able to gain enough points over a trace lasting milliseconds to see the pulses that you mention. What I would recommend is ensuring that the speed at which you believe you need to sample is within the capabilities fo the unit.

Hope this helps

Best Regards
Sarah
 


Return to PicoScope 5

Who is online

Users browsing this forum: No registered users and 2 guests