How to change the sampling rate of Pico 4824 in matlab

Post your MATLAB discussions here
Post Reply
Mohammed
Newbie
Posts: 0
Joined: Tue Apr 21, 2015 10:36 am

How to change the sampling rate of Pico 4824 in matlab

Post by Mohammed » Tue Apr 21, 2015 10:46 am

Hi,
Can some one advice me about how to change the sampling rate of Pico 4824 in matlab. I am using PS4000A_IC_Generic_Driver_Block.m to capture the data. Currently the default sampling rate is 1MS/s. I would like to change it to 80 MS/s.

Than you in advance.

regards
Mohammed

Martyn
Site Admin
Site Admin
Posts: 3309
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: How to change the sampling rate of Pico 4824 in matlab

Post by Martyn » Mon Apr 27, 2015 7:29 am

For 80MS/s you will need to set timebase as 0, the sampling rate is

Code: Select all

80/(timebase+1) MS/s
Look at the GetTimebase function in the script and change the default from 79, which gives 1MS/s, to 0
Martyn
Technical Support Manager

Post Reply