Test and Measurement Forum

Picoscope 3204

Which product is right for your exact requirements

Picoscope 3204

Postby Guest » Fri Jun 10, 2005 11:35 am

How do you calibrate the 3204 scope?
Guest
 

Postby Sarah » Mon Jun 13, 2005 11:10 am

Hi

Thank you for your post.

The only way to get a 3204 calibrated is to send it to us. This is because the information needs to be stored on the unit and only we can program this. If you would like us to calibrate a unit for you then please let me know.

Best Regards
Sarah
 

Picoscope 3204 Calibration

Postby Guest » Thu Jun 16, 2005 7:48 am

Thank you for the reply.

Could you tell me the cost of calibration and the turnaround time for this service.

Also the recommended interval between calibration. Is thier a discount for more than one being calibrated? Does the scope come with calibration?
Guest
 

Postby Sarah » Thu Jun 16, 2005 10:41 am

Hi

Thank you for your post.

The cost of calibration depends on the unit, the standard charge for a PS3000 is £50 plus tax and delivery.

We have a turnaround time of 5 working days from receipt of the unit and payment. The calibration comes with a certificate which is valid for one year. All scopes are tested before they are sent out, however calibration is extra. We do not offer discounts on calibrations.

Hope this helps

Best Regards
Sarah
 

Postby Guest » Thu Jun 16, 2005 12:27 pm

Is the calibration UKAS standard?
Guest
 

Postby Sarah » Tue Jun 21, 2005 11:53 am

Hi

Thank you for your post.

No, the calibration is traceable to National Standards but is not UKAS standard.

Hope this helps

Best Regards
Sarah
 


Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 0 guests