PicoScope 7 Software
Available on Windows, Mac and Linux
I2C 7 bit Address decoding problem
I2C 7 bit Address decoding problem
Hi all,
I am trying to monitor I2C bus 7 bit address -3.3 volts - 400kb/s. I know that the slave's address is 0x30 but decoder gives 0x60. Is there any solution for this problem. You can find system details below.
PicoScope® 6 - PC Oscilloscope software version: 6.10.16.2
Copyright © 1995-2015, Pico Technology Ltd
Model: PicoScope 2205 MSO
Serial Number: CY067/264
USB Version: 2.0
Calibration Date: Wednesday, June 26, 2013
Hardware Version: 1
Driver Version: 1.1.4.42
Firmware Version: 1.3.3.0 / 0.2.29.0
http://i62.tinypic.com/35iqf6p.jpg
http://i57.tinypic.com/dz8dx.jpg
http://i58.tinypic.com/imuhhl.jpg
http://i61.tinypic.com/23vgmro.jpg
I am trying to monitor I2C bus 7 bit address -3.3 volts - 400kb/s. I know that the slave's address is 0x30 but decoder gives 0x60. Is there any solution for this problem. You can find system details below.
PicoScope® 6 - PC Oscilloscope software version: 6.10.16.2
Copyright © 1995-2015, Pico Technology Ltd
Model: PicoScope 2205 MSO
Serial Number: CY067/264
USB Version: 2.0
Calibration Date: Wednesday, June 26, 2013
Hardware Version: 1
Driver Version: 1.1.4.42
Firmware Version: 1.3.3.0 / 0.2.29.0
http://i62.tinypic.com/35iqf6p.jpg
http://i57.tinypic.com/dz8dx.jpg
http://i58.tinypic.com/imuhhl.jpg
http://i61.tinypic.com/23vgmro.jpg
- Attachments
-
- 20150414-0005.psdata
- (101.66 KiB) Downloaded 348 times
Re: I2C 7 bit Address decoding problem
Have you tried feeding the signals into the digital channels, and decode them there ?
Martyn
Technical Support Manager
Technical Support Manager