PicoScope 7 Software
Available on Windows, Mac and Linux
File.SaveAs
File.SaveAs
LS
I am using command: Picoscope /a File.SaveAs.IO=name.csv to automatically save averaged recorded data to file.
The waveforms are averaged and and updated in the last of the total of 64 waveforms.
How can I select only this waveform in the saved file ?
(in interactive mode a choice can be made: all, last or some range)
Regards,
Rudolf Sprik
I am using command: Picoscope /a File.SaveAs.IO=name.csv to automatically save averaged recorded data to file.
The waveforms are averaged and and updated in the last of the total of 64 waveforms.
How can I select only this waveform in the saved file ?
(in interactive mode a choice can be made: all, last or some range)
Regards,
Rudolf Sprik
Re: File.SaveAs
Hi Rudolf,
The SaveAs command does not have these options. I will created feature request for this.
Unfortunately not every feature in Picsoscope 6 is available with the command/macro functions.
From a command prompt type
to list all available commands.
The SaveAs command does not have these options. I will created feature request for this.
Unfortunately not every feature in Picsoscope 6 is available with the command/macro functions.
From a command prompt type
Code: Select all
picoscope.com /a ?Regards Andrew
Technical Specialist
Technical Specialist