File.SaveAs

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
sprik
Newbie
Posts: 0
Joined: Fri Apr 10, 2015 2:29 pm

File.SaveAs

Post by sprik » Fri Apr 10, 2015 2:40 pm

LS
I am using command: Picoscope /a File.SaveAs.IO=name.csv to automatically save averaged recorded data to file.
The waveforms are averaged and and updated in the last of the total of 64 waveforms.
How can I select only this waveform in the saved file ?
(in interactive mode a choice can be made: all, last or some range)

Regards,
Rudolf Sprik

AndrewA
PICO STAFF
PICO STAFF
Posts: 198
Joined: Tue Oct 21, 2014 3:07 pm

Re: File.SaveAs

Post by AndrewA » Tue Apr 14, 2015 12:57 pm

Hi Rudolf,
The SaveAs command does not have these options. I will created feature request for this.
Unfortunately not every feature in Picsoscope 6 is available with the command/macro functions.
From a command prompt type

Code: Select all

picoscope.com /a ?
to list all available commands.
Regards Andrew
Technical Specialist

Post Reply