Test and Measurement Forum

Pico Logger 1012 - Streaming mode

Post your LabVIEW discussions here

Pico Logger 1012 - Streaming mode

Postby tc_magic » Thu Apr 09, 2015 9:20 am

I am using a PicoLog Data logger in streaming mode to capture 720 samples on 11 channels. (720 * 11 = 7920)

I have assumed that every second I would get 7920 samples and am using the 1 second timer for my frame time.

I have a test script which uses the 1 second timer and have found that there are some instanced where the 1 second times does not go off so the script takes longer than it should.

Should I stop relying on the pico logger to time 1 second?

I remember in the olden days that windows would turn USB devices off if it thought it wasn't using them, do you think this is the case?
tc_magic
Newbie
 
Posts: 0
Joined: Thu Apr 09, 2015 9:16 am

Re: Pico Logger 1012 - Streaming mode

Postby AndrewA » Tue Apr 14, 2015 1:42 pm

Hello,
Can you attach the vi to post or email into support@picotech.com
Regards Andrew
Technical Specialist
AndrewA
Zen Master
Zen Master
 
Posts: 178
Joined: Tue Oct 21, 2014 3:07 pm


Return to LabVIEW

Who is online

Users browsing this forum: No registered users and 0 guests