ADC 22

Which product is right for your exact requirements
Post Reply
Lindsay
User
User
Posts: 8
Joined: Sun Jun 05, 2005 11:45 am

ADC 22

Post by Lindsay » Mon Jun 06, 2005 3:47 pm

I am running a data logger adc10 through my serial port.
I want to expand my system and install a ADC22 channel logger to monitor various voltage measurements through a usb adapter and then usb port.
Can I run both units off the same computer system
Can I measure different voltages with the ADC22 independantly i.e no common power lines

Sarah

Post by Sarah » Thu Jun 09, 2005 9:16 am

Hi Lindsay

Thank you for your post.

Firstly, the ADC-10 is a parallel port device. It is possible to use both the ADC-22 and the ADC-10 at the same time on the same computer if you are using Picolog. One of these can be on a USB adaptor. Each channel will enable you to make a seperate voltage measurement.

Hope this helps

Best Regards

Lindsay
User
User
Posts: 8
Joined: Sun Jun 05, 2005 11:45 am

ADC 22

Post by Lindsay » Thu Jun 09, 2005 9:43 am

Sarah,

Thank you for your comments. This cleared up my queeries.

Post Reply