Serial decode of SPI with two channels

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
Armand
Newbie
Posts: 0
Joined: Fri Jun 28, 2013 9:22 am

Serial decode of SPI with two channels

Post by Armand » Sun Apr 05, 2015 4:08 pm

Is this possible? I can see that there is a check box for the chip select signal, but I am not able to get any data. Only serial decoding failed. Am I doing something wrong?

Armand
Attachments
Screen Shot 04-05-15 at 06.06 PM.PNG
Screen Shot 04-05-15 at 06.05 PM.PNG

Armand
Newbie
Posts: 0
Joined: Fri Jun 28, 2013 9:22 am

Re: Serial decode of SPI with two channels (SOLVED)

Post by Armand » Sun Apr 05, 2015 8:47 pm

I was able to fix it. A restart of the program was all that was needed. Also, to have a stable decode of the data I had to invert the clock phase from actual phase.
I just LOVE this serial decode function. It is really helpful during debugging.

Post Reply