Test and Measurement Forum

"serial decoding is not supported for this sampling mode"

Forum for discussing PicoScope version 6 (non-automotive version)

"serial decoding is not supported for this sampling mode"

Postby stevenvh » Mon Mar 30, 2015 2:39 pm

I'm using my 3200D MSO in digital mode, and want to decode the UART data on one of the channels. But PicoScope says

serial decoding is not supported for this sampling mode. Please change the mode and try again.


And indeed, the data shown is wrong. I would like to add more information about my settings, but I'm not sure what I should look for. What are required conditions for the decoder(s)?
stevenvh
Newbie
 
Posts: 0
Joined: Mon Feb 09, 2015 3:02 pm

Re: "serial decoding is not supported for this sampling mode

Postby Martyn » Tue Apr 07, 2015 1:00 pm

If you send in the psdata file for this situation we can take a look at what is causing the message.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2348
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: "serial decoding is not supported for this sampling mode

Postby stevenvh » Fri Apr 17, 2015 8:52 am

It looks like I can't reproduce the error. For the moment the decoder does its job. I'll send you the .psdata file when/if it happens again.
stevenvh
Newbie
 
Posts: 0
Joined: Mon Feb 09, 2015 3:02 pm


Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 1 guest