Test and Measurement Forum

4424 fuses blown

Post any questions you may have about our current range of oscilloscopes

4424 fuses blown

Postby graham.sharp » Thu Mar 26, 2015 2:26 pm

Hi guys,

Unfortunately it appears as if I have popped 2 of the re settable fuses on the BNC inputs of my picoscope 4424. It looks like these can easily be replaced. Does anybody know the right value of these for this model as I'd like to fix it ASAP!

Thanks,

Graham
graham.sharp
Newbie
 
Posts: 0
Joined: Thu Mar 26, 2015 11:50 am

Re: 4424 fuses blown

Postby AndrewA » Mon Mar 30, 2015 1:10 pm

Hello Graham,

If the fuses are blown, we normally replace these free of charge, this includes a factory re test to ensure the unit is fully functioning, and in specification.
Please email into support@picotech.com with your contact details and the unit's serial number, and will issue a returns number.

(You will find the s/n in PicoScope with the unit connected - 'help' menu - About PicoScope 6.
Or on the bottom side of the unit, the number under the bar code ie XXXX/XXX)
Regards Andrew
Technical Specialist
AndrewA
Zen Master
Zen Master
 
Posts: 178
Joined: Tue Oct 21, 2014 3:07 pm


Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 1 guest