>>" graph Amplitude (16-bit ADC counts) vs sample"
is there any example VIs that have similiar waveform with picoscope6 software?---> desire waveform graph is voltage vs time domain"
i made some adjustment vis(PicoScope5000ExampleBlock) previously use for picoscope 5203 change to PicoScope5000aExampleBlock for picoscope 5244B "voltage vs time domain graph" in attachment but its not working...
hopefully you can advise
Best Regards
Tarmimi
-->
Good Day AndrewA
what i meant by "but using picoscope with the labVIEW... example "PicoScope5000aExampleBlock"; there is a noise consider abnormal waveform."-->>>" graph Amplitude (16-bit ADC counts) vs sample"
is there any example VIs that have similiar waveform with picoscope6 software?---> desire waveform graph is voltage vs time domain"
i made some adjustment vis(PicoScope5000ExampleBlock) previously use for picoscope 5203 change to PicoScope5000aExampleBlock for picoscope 5244B "voltage vs time domain graph" in attachment but its not working...
I post a simple vi to convert ADC counts to volts on this post- topic19071.html?hilit=adc%20to%20volts#p59221
Adding this vi is a very simple change. In future we would like to include this in all our examples.
I did download your vi above but openunit vi seemed to have changed.
Can you give an advise on using the get time base API programming ... where should i put the API programming? after the run block or before the run block right after( refer attachment)
is it possible to give an example...? still not get the basic idea on how to use the get time base API...