Test and Measurement Forum

adc212 serial no.

Forum for discussing PicoScope (version 5)

adc212 serial no.

Postby john weddup » Wed May 25, 2005 8:37 am

Hi I have an adc212 plus I purchased the automotive software on cd at a later date.

I wish to upgrade software but cannot see my serial no. on unit. My current version is 5.09.0.

thanks

john
john weddup
 

Postby Sarah » Wed May 25, 2005 9:04 am

Hi

Thank you for your post.

If you go to Help | About in the software which you already have, then the dialogue there will tell you your serial number.

Hope this helps

Best Regards
Sarah
 

Postby john weddup » Wed May 25, 2005 10:19 am

thankyou for your very quick reply. I must be dafter than I thought I was as I still cannot find serial no.

Any further help would be gratefully received.

thanks

john
john weddup
 

Postby Sarah » Fri May 27, 2005 11:03 am

Hi John

Thank you for your post.

Open the software with the unit connected. What does help about say? The serial number is the same as the batch number so you may need to look for that instead.

If you still cannot see it then copy what help about says onto here and I will see if I can see it.

Best Regards
Sarah
 


Return to PicoScope 5

Who is online

Users browsing this forum: No registered users and 0 guests