Test and Measurement Forum

Stored oscilloscope data to specrta

Forum for discussing PicoScope version 6 (non-automotive version)

Stored oscilloscope data to specrta

Postby H_Anger » Fri Mar 20, 2015 11:20 am

Hello to all,
i'm new with the PicoScope Software, my question refers to the possibility (if there is one at all) to use the FFT (spectral view) of the PicoScope to create out of saved oscilloscope data (from the connected oscilloscope) a spectrum.
The work arround would be to store the signal values as a csv and afterwards run the fft in excel.

Thanks in advance
Posts: 0
Joined: Fri Mar 20, 2015 11:15 am

Re: Stored oscilloscope data to specrta

Postby AndrewA » Wed Mar 25, 2015 4:11 pm

Hello Hannes,

Yes you can, open a psdata file (scope view capture)
To add a spectrum ‘view’-
Right click anywhere in the waveform view buffer, choose ‘add view’ -> ‘Spectrum’
You may need to use the zoom tool, in the new spectrum view.

Regards Andrew
Technical Specialist
Regards Andrew
Technical Specialist
Posts: 186
Joined: Tue Oct 21, 2014 3:07 pm

Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 0 guests