Test and Measurement Forum

several traces on the screen

Post any questions about our parallel port products

several traces on the screen

Postby arielmedina » Tue May 10, 2005 7:50 pm

I am using an ADC 212/50 and I would to know how can I paste or recover several traces on the scope screen to make a comparisson among those.
I can do it using graph in Excel. But this way is a too much complicated.
Have you another way?
Thanks.

Ariel
arielmedina
Active User
Active User
 
Posts: 17
Joined: Thu Nov 11, 2004 2:40 pm

Postby Sarah » Wed May 11, 2005 9:16 am

Hi

Thank you for your post.

Once you have captured a trace, go to View | Freeze\Thaw One. This will freeze the trace. Then open a new scope view and start recording - the other trace should remain frozen. This should help you achieve your aim.

Hope this helps

Best Regards
Sarah
 

Postby Guest » Wed May 11, 2005 12:39 pm

Thank you for your reply.

Ok. Now I can to remain frozen the first trace and capture a new one. But I want to see both traces, the old and new one on the same background, because the different beetwen them are very small.
Could the scope capture on the screen which is in FREEZE mode?

I will appreciate your assistance.

Best Regards

Ariel
Guest
 

Postby Sarah » Thu May 12, 2005 9:15 am

Hi

Thank you for your post.

Can I assume from your message to me that you have sorted this now?

Best Regards
Sarah
 

Postby jarvissamuel » Sun May 29, 2005 4:27 pm

If the two images are in saved files the file merge feature could be used for observing the the difference between the two (if 212-50 has this ability)
jarvissamuel
User
User
 
Posts: 2
Joined: Wed May 18, 2005 5:11 am
Location: Denver Colorado


Return to Parallel Port Products

Who is online

Users browsing this forum: No registered users and 0 guests