PicoScope 7 Software
Available on Windows, Mac and Linux
accumulative trace
-
cinemanuk
accumulative trace
I recently upgraded my ADC200 to run on Windows XP. I used to accumulate the traces over a few seconds to see any deviation. Now I only appear to be able to do this in the XY mode, am I missing something or has this facility been dropped.
-
Sarah
Hi
Thank you for your post.
There should be no difference in operation of the software across the Windows operating systems. You should be able to use different modes such as you need by going to settings, options. You should then be able to change the display modes and take advantage of various averaging and max/min functions.
If this is not hat you are looking for, then let me know. If you can give me some more information as to how you were doing it before then this will help.
Best Regards
Thank you for your post.
There should be no difference in operation of the software across the Windows operating systems. You should be able to use different modes such as you need by going to settings, options. You should then be able to change the display modes and take advantage of various averaging and max/min functions.
If this is not hat you are looking for, then let me know. If you can give me some more information as to how you were doing it before then this will help.
Best Regards