Test and Measurement Forum

Using IP Sockets with PicoLog

Forum for discussing PicoLog

Using IP Sockets with PicoLog

Postby design360 » Tue Feb 24, 2015 2:31 pm

It would seem that PicoLog supports some form of TCPIP connection but I'm not having any luck getting it working. I am not even sure what it's capabilities actually are, am I able to use this feature to remotely monitor a recording or is it just to enable using another PC running PicoLog to record from a "server" copy on the PC with the TC-08 acttached?

Regards, Ian.
Posts: 0
Joined: Wed Oct 01, 2014 12:30 pm

Re: Using IP Sockets with PicoLog

Postby Hitesh » Mon Mar 02, 2015 3:45 pm

Hi Ian,

According to the PicoLog User Guide:

The PicoLog IP socket facility is used to take measurements on one or more
computers, and record the data on another computer.

The measurements are taken by PicoLog on the Server. Another computer, the Client,
requests the data via an IP network.

This allows another PC to record the data locally.

You can find instructions on how to use this feature in section 3.12 (Transfer data over an IP network) in the PicoLog User's Guide:



Technical Support Engineer
Site Admin
Site Admin
Posts: 2743
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Return to PicoLog

Who is online

Users browsing this forum: No registered users and 1 guest