pt100 probes

Which product is right for your exact requirements
Post Reply
isa

pt100 probes

Post by isa » Mon Apr 25, 2005 11:05 pm

Hi

I am looking for a probe with accuracy better than 0.1C, for use in calibration of thermocouples. I am thinking of the SE012

I need to get the temperature-resistance curve.
Do you send this along with the sensor?


thank you

Sarah

Post by Sarah » Tue Apr 26, 2005 9:19 am

Hi

Thank you for your post.

I do not believe this curve is sent out with the sensor. Instead you could use the pt100 scaling file which is installed when you install our Picolog software. You can download the software for free from:

http://www.picotech.com/software

Hope this helps

Best Regards

Post Reply