Test and Measurement Forum

PicoScope 3425 with more memory

Which product is right for your exact requirements

PicoScope 3425 with more memory

Postby bennog » Wed Feb 18, 2015 7:17 am

Hello,

I am looking for a differential input oscilloscope with more sample memory than the 3425
And preferred USB3.

I want to use it for decoding a 500kbps CAN bus in a industrial automation project.
The isolated inputs make it ideal for this kind of trouble shooting.
When something go's wrong I want to be able to see the last 10 or 20 seconds of CAN messages and corresponding IO signals, e.g. CAN on chA and 3 24V IO on ch B,C and D.

Benno
bennog
Guru
Guru
 
Posts: 79
Joined: Mon Nov 26, 2012 9:16 am

Re: PicoScope 3425 with more memory

Postby Hitesh » Tue Feb 24, 2015 1:49 pm

Hi Benno,

We do not currently have any products that will meet your requirements.

I will feed this information through to our Development Team.

You may wish to consider a deep memory USB 3.0 oscilloscope with differential probes.

Regards,
Hitesh

Technical Specialist
Pico Technology
Hitesh
Site Admin
Site Admin
 
Posts: 2008
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: PicoScope 3425 with more memory

Postby bennog » Wed Feb 25, 2015 7:24 am

Yes I am using a 4424 with 32MS memory for this and 1 differential probe on battery but when you are tracking a problem that happens 1 time a day your battery runs out before the problem shows up.

P.S. I was impressed with the cables with the 3425 scope are you selling the cable set without the scope ?
the cables of the 3425 scope are far better to handle for IA than the probes of my 4424.

Benno
bennog
Guru
Guru
 
Posts: 79
Joined: Mon Nov 26, 2012 9:16 am

Re: PicoScope 3425 with more memory

Postby Hitesh » Thu Feb 26, 2015 2:10 pm

Hi Benno,

Depending on the differential probe you are using, you can purchase a power supply:

https://www.picotech.com/accessories/active-oscilloscope-probes

We do sell BNC to 4mm plug screened twisted-pair cable - please visit https://www.picotech.com/oscilloscope/3425/picoscope-3425-accessories and click on 'BNC terminators and leads'

Hope this helps,
Hitesh

Technical Specialist
Pico Technology
Hitesh
Site Admin
Site Admin
 
Posts: 2008
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire


Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 1 guest