pico t 08

Which product is right for your exact requirements
Post Reply
juju

pico t 08

Post by juju »

Sorry i am french i don't speak well english.

I have i TC 08 in serial (RS232) but i havn't port into my computer i have only usb so i plug/connect with a connector my RS232output into the input usb....

but in labview the driver TC 08 bug labview say when i put the vi that it miss. so i use USB TC 08 driver but i don't have value :(

please help me

Sarah

Post by Sarah »

Hi

Thank you for your post.

The USB TC-08 driver is for our USB TC-08 - a different unit which has a USB port.

To use your unit on USB you will need a USB to RS232 adaptor (we sell these ourselves if you wish to buy from us). This would then give you a virtual COM port - and you would then use the same driver in labview and simply pick this new COM number.

Hope this helps

Best Regards

Post Reply