Test and Measurement Forum


Which product is right for your exact requirements


Postby a7808 » Mon Apr 18, 2005 9:27 am

In the science experiment by using ADC-212, there is 1 item i.e Two Microphones - crystal Mics were used here since they are cheap and give a large output. May I know what BNC connector or cable has been used. Is the BNC connector with 50ohm or 75ohm? What is the cable type look like? Please advise me. Thank you

Postby Sarah » Mon Apr 18, 2005 10:44 am


Thank you for your post.

The BNC should be a 50 Ohm one. I believe that it is just a standard BNC cable.

Hope this helps

Best Regards

Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 0 guests