Test and Measurement Forum

ADC-11/12 and LabVIEW 7.0 example problems

Post your LabVIEW discussions here

ADC-11/12 and LabVIEW 7.0 example problems

Postby achi02 » Wed Apr 06, 2005 12:15 pm

Hello everybody,

I am currently dealing with some problems with ADC-11/12 (parallel port) and LabVIEW 7.0. I am using the newest Pico software, version 5.12.0 and Windows XP.

I am trying to use the LabVIEW example wich i downloaded from the official website but without any luck. As I see it, there must be an error in the provided example.

I am opening adc11.llb with LabVIEW and adc11_single.vi from in there.
A label on the frontpanel of the example tells me that Ports 1 is for LPT1, Ports 2 is for LPT2 and so on......altough if I take a look at the "Numeric properties for Port" and look at "description" tab it says:

"Serial port that the TC-08 is connected to: use 1 for COM1, 2 for COM2 etc"


... :?: :? :? :? so...as you all can read I am a bit confused.....the example was dowloaded especially for ADC-11/12 but it seems that it is made for the TC-08 thermocouple data logger...what is the alternative?

Regards,
Adrian
achi02
Newbie
 
Posts: 1
Joined: Wed Apr 06, 2005 11:46 am

Postby Sarah » Thu Apr 07, 2005 8:04 am

Hi

Thank you for your post.

We received your email regarding this problem and my colleague will be in touch with you by email soon.

Best Regards
Sarah
 


Return to LabVIEW

Who is online

Users browsing this forum: No registered users and 0 guests