Test and Measurement Forum

Presales question: Pico 3205

Which product is right for your exact requirements

Presales question: Pico 3205

Postby Mark1 » Tue Apr 05, 2005 5:39 pm

A have a few questions relating to the storage oscillscope and signal generator functions of the Pico 3205.

1) Does the pico-scope support pre-triggering? I would like record measurements for a duration of 50ms starting at 5ms before the trigger event.

2) Can the signal generator and scope functions operate simultaniously?

3)What is the peak to peak amplitude of the signal generator function?
what adjustments (e.g. amplitiude and DC offset) does it have?

Thanks
Mark
Mark1
 

Postby Sarah » Wed Apr 06, 2005 12:12 pm

Hi

Thank you for your post.

1) Yes, the Picoscope will do pre-triggering measurements.

2) Yes, both can operate at the same time.

3) The peak to peak on the signal generator varies depending on the wave. A square wave is 5V pk-pk, and both sine and triangle waves are 1V pk-pk. It does not support a DC offset facility.

Hope this helps

Best Regards
Sarah
 


Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 0 guests