Test and Measurement Forum

DC Average between Cursors

Forum for discussing PicoScope version 6 (non-automotive version)

DC Average between Cursors

Postby JohnDSutter » Thu Jan 08, 2015 2:27 am

I don't seem to understand how to take a "DC average" measurement "between cursors".
When I set the cursor along the bottom to the region I am interested in, I get nothing.
If I change the measurement to the whole waveform it is fine.

I am running the latest version.

The cursors are showing 0 and 360 degrees as opposed to delta t as I would have expected.

Any ideas what I am doing wrong?

- John
JohnDSutter
Newbie
 
Posts: 0
Joined: Thu Jan 08, 2015 1:34 am

Re: DC Average between Cursors

Postby Martyn » Thu Jan 08, 2015 8:26 am

You have pulled in the Phase Rulers from the right hand side. The cursors are located at the bottom left of the screen, the little white square.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2355
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: DC Average between Cursors

Postby JohnDSutter » Thu Jan 08, 2015 7:21 pm

Didn't even see those. Thanks much!

- John
JohnDSutter
Newbie
 
Posts: 0
Joined: Thu Jan 08, 2015 1:34 am


Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 0 guests