Test and Measurement Forum

Pico Log freezes

Forum for discussing PicoLog

Pico Log freezes

Postby Jim Walker » Tue Mar 22, 2005 11:37 pm

I am continuing to have problems with Picolog freezing after about a minute of operation. It appears to continue to take samples but the samples do not change value even when the probe is lifted from its connection point.

I am running Windows 2000 on a Sony laptop. The converter is an ADC-212-100. I have changed the printer port to all possible settings including output only and disabled legacy plug and play. Picoscope also freezes when set to a very slow sweep such as 50 seconds / division.
Jim Walker
Walker Power Design, Inc.
Jim Walker
Newbie
 
Posts: 1
Joined: Sun Apr 04, 2004 11:17 pm

Postby Guest » Wed Mar 23, 2005 8:11 am

The problem appears to be solved. I removed an Orcad dongle and it seems to work fine now.
Guest
 


Return to PicoLog

Who is online

Users browsing this forum: No registered users and 1 guest