Sampling stops after pressing start record

Forum for discussing PicoLog
Post Reply
Aron
Newbie
Posts: 0
Joined: Mon Nov 17, 2014 4:04 pm

Sampling stops after pressing start record

Post by Aron » Mon Nov 17, 2014 4:11 pm

Hi.
I measuring with a strain gage.
I have a problem, when I am pressing the start record buttom the parameter does not update.
Before I press the start record buttom I can see that the parameter are updaing when i am chaingen the force on the strain gage. When I doe press the start record buttom the value freezes and every sample in the spread sheet hase are the same. I have tried to chagned the sampling rate.

Any one have an idea how I can solve this problem.

Thansk in advance

Hitesh
Site Admin
Site Admin
Posts: 2829
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Sampling stops after pressing start record

Post by Hitesh » Wed Nov 19, 2014 9:55 am

Hi Aron,

Could you please provide the following information:
  • The version of PicoLog that you are using
  • The device that you are using
  • The operating system that you are using
If you could save the settings file from PicoLog Recorder (click File -> Save as... and select 'Settings files (*.pls)') for the 'Save as type' that would be helpful.

Regards,
Hitesh

Technical Support Engineer

Post Reply