Test and Measurement Forum


Come here to introduce yourself, who you are, and what you do


Postby Frosty » Wed Oct 29, 2014 4:06 pm

I have had my ADC10 for about 20 years and as you know most laptops & PC's no longer have parallel ports :( can I use a Parallel to USB Converter to use my ADC10? Any comments welcome.
Posts: 0
Joined: Wed Oct 29, 2014 3:46 pm

Re: ADC10

Postby Hitesh » Thu Oct 30, 2014 3:51 pm

Hi Frosty,

If you are using a desktop PC, please refer to the following post:


If you are using a laptop you can try the following:

For laptops with an Express card slot:-

For laptops with a PCMCIA card slot:-

In either case, a parallel port adaptor that is only for parallel port printers will not be suitable - the adaptor should have drivers supplied with it.

Please note that Pico Technology parallel port products are not suitable with 64-bit operating systems.

Note: Pico Technology is not responsible for the content of external third party sites.

I hope this helps.

Technical Support Engineer
Site Admin
Site Admin
Posts: 2581
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Return to Introductions

Who is online

Users browsing this forum: No registered users and 0 guests