Hello,

Is there a possibility to calculate the utilization of A CAN bus with help from the math channel functions or some other way to do this.

Regards,

Benno

3 posts
• Page **1** of **1**

Hello,

Is there a possibility to calculate the utilization of A CAN bus with help from the math channel functions or some other way to do this.

Regards,

Benno

Is there a possibility to calculate the utilization of A CAN bus with help from the math channel functions or some other way to do this.

Regards,

Benno

- bennog
- Guru
**Posts:**79**Joined:**Mon Nov 26, 2012 9:16 am

I can't think of any maths channel calculation that would give reliable figures for utilization.

Martyn

Technical Specialist

Technical Specialist

- Martyn
- Site Admin
**Posts:**2314**Joined:**Fri Jun 10, 2011 8:15 am**Location:**St. Neots

A lot of messages with 1 will decrease the bus load.

A lot of messages with 0 will increase the bus load.

So this is not a solution for calculating the bus load.

Benno

A lot of messages with 0 will increase the bus load.

So this is not a solution for calculating the bus load.

Benno

- bennog
- Guru
**Posts:**79**Joined:**Mon Nov 26, 2012 9:16 am

3 posts
• Page **1** of **1**

Return to PicoScope 6 for Windows

Users browsing this forum: No registered users and 0 guests