Which One Is The Right One???

tazelikechickn · Post by **tazelikechickn** » Tue Oct 21, 2014 7:52 am

Hey Guys,

I work for an education institute and am looking for a Pico Oscilloscope. At the previous campus that I worked at, I had an excellent Pico set up. Unfortunately, money is a factor and so I am looking for a 2 channel scope with all the automotive software included, probably with a 50MHz sample rate. (just a thought)

Does anyone know if the automotive package is included with all the scopes? I know that I used to be able to update the software on the old one I used.

I have looked at some that are available and the 4000 series seems to fit the bill. I am looking at spending about $1,000 - 1,500 AUD, but would be grateful to spend less.

Any thoughts?

Post by **Martyn** » Tue Oct 21, 2014 9:00 am

You will need to be looking at 4225 as the current Automotive Scope, you may be able to acquire a 4223 from a distributor as these have only just been replaced by the current model, or a 3223 second hand.

These are the only two channel scopes that will work with the automotive software, all other models are for Test and Measurement use only.

For more advice please visit our Automotive Forum at http://www.picoauto.com/support/ and our Automotive Website http://www.picoauto.com/index.html

tazelikechickn · Post by **tazelikechickn** » Tue Oct 21, 2014 12:24 pm

Hey Martyn,

Thanks for the advice, I will follow it up thru a distributor.

Test & Measurement Forum

Which One Is The Right One???

Which One Is The Right One???

Re: Which One Is The Right One???

Re: Which One Is The Right One???