Pt-104 and Agilent Vee 9.2

Post general discussions on using our drivers to write your own software here
Post Reply
Posts: 0
Joined: Thu Oct 16, 2014 3:41 pm

Pt-104 and Agilent Vee 9.2

Post by dereach » Thu Oct 16, 2014 3:45 pm

I need to use Agilent Vee 9.2 to measure temperature with pt-104, but I can not find any examples or libraries. It is still supported? Maybe someone has some older SDK with vee support.

Thanks in Advance


Site Admin
Site Admin
Posts: 2846
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Pt-104 and Agilent Vee 9.2

Post by Hitesh » Mon Oct 20, 2014 4:23 pm

Hi Daniel,

If you are using the old PT-104 with an RS-232 connection, you can download the SDK with a VEE example from

In step 1, please select the PT-104 PT100 Data Logger (RS-232) and in step 2, please select the option for the Software Development Kit.

If you are using the USB PT-104, then you might be able to use the above SDK example or the USB TC-08 Thermocouple Data Logger example as a basis in conjunction with the Programmer's Guide.


Technical Support Engineer

Post Reply