Test and Measurement Forum

pico TC08

Having problems ? let us know the details here

pico TC08

Postby jacciona » Wed Oct 01, 2014 4:29 pm

Hi,

I am using a pico TC-08 data loggger but I am finding strange temperature readings.... especially when I am combining two types of K thermocouples. One is the standdard K thermocouple (Type K Thermocouple (Exposed wire, fibreglass insulated)
Tip Diameter: 1.5 mm) and the second one is a also K type and insulated but thinner...tip diameter 0.5mm.

Main problem is that during the measurement all temperature readings of all thermocouples suddenly goes up few degrees.... and few minutes after goes down ....

any idea???


thanks
jacciona
Newbie
 
Posts: 0
Joined: Wed Oct 01, 2014 4:09 pm

Re: pico TC08

Postby jacciona » Fri Oct 03, 2014 9:26 am

Thanks for your response, unpluging the laptop power to the mains and runing it off the battery solve the problem....



nice to have a good support service!!!!!


javier
jacciona
Newbie
 
Posts: 0
Joined: Wed Oct 01, 2014 4:09 pm

Re: pico TC08

Postby Callum » Fri Oct 03, 2014 12:05 pm

Hi Jacciona,

Glad i was able to help with your issue through help desk.
Callum

Technical Specialist
Callum
PICO STAFF
PICO STAFF
 
Posts: 3
Joined: Tue Sep 02, 2014 10:45 am


Return to Getting Started

Who is online

Users browsing this forum: No registered users and 0 guests