Labview VI for serial decoding

Post your LabVIEW discussions here
Post Reply
aheld
Newbie
Posts: 0
Joined: Mon Sep 15, 2014 4:41 am

Labview VI for serial decoding

Post by aheld »

Hello,
I'm searching for a labview VI to decode a serial data stream, received with the Pico3204A device.
The serial data stream is a single trigger event, made with the analogue oscilloscope funktion of the Pico3204A at single line. There is no extra clk line or information, but I know the data rate (1200 b/s) and there is very less noise on the signal.
Can any one helps me out with this kind of VI?

Thnks in advanced
Axel

Karunen
Advanced User
Advanced User
Posts: 194
Joined: Thu Nov 21, 2013 9:22 am

Re: Labview VI for serial decoding

Post by Karunen »

Hi Axel,

Unfortunately as we are not LabVIEW experts we do not know how to do this.

You might find a solution if you use the national instruments labVIEW forum.

If you do so please post a link on this thread for other customers that would like a similar application.

Kind Regards,
Karunen

Technical Specialist
Pico Technology

Post Reply