Test and Measurement Forum

Send a trigger on picoscope2204A

Post your MATLAB discussions here

Send a trigger on picoscope2204A

Postby StefanoUniroma » Tue Sep 02, 2014 10:40 am

hi ,
i use a picoscope 2204A to track a tension. I want that the picoscope track this tension and when exceed a tension level send a external trigger to a gps. what i must change to able this trigger output???
thanks to all for support
StefanoUniroma
Newbie
 
Posts: 0
Joined: Thu Jul 10, 2014 7:18 pm

Re: Send a trigger on picoscope2204A

Postby Hitesh » Tue Sep 02, 2014 1:45 pm

Hi StefanoUniroma,

Unfortunately, it is not possible to trigger the signal generator output on this device, although you can call a function to start outputting a signal from the device.

Most devices from the PicoScope 3000 through to 6000 Series range have the ability to trigger the signal generator to output a specified waveform when a trigger condition is met.

Regards,
Hitesh

Technical Specialist
Pico Technology
Hitesh
Site Admin
Site Admin
 
Posts: 2063
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire


Return to MATLAB

Who is online

Users browsing this forum: No registered users and 0 guests